Illustration — the actual product may differ
Level SensorsCapacitive Level Limit Switch Level limit switch Capcont LS
Product codeCapcont LS
- Measuring principle
- Capacitive Level Limit Switch
- Product type
- Capacitive Level Limit Switch
- Manufacturer categories
- Fill level, Capacitive, Bulk materials, Liquids
General
- Product type
- Capacitive Level Limit Switch
- Manufacturer categories
- Fill level, Capacitive, Bulk materials, Liquids
ACS Capacitive Level Limit Switch · For use in hygienic areas · Switching point can be easily adjusted via the sliding sleeve · Very compact
- ACS-Control-System Capacitive Level Limit Switch: Level limit switch Capcont LS.
- For use in hygienic areas
- Switching point can be easily adjusted via the sliding sleeve
- Very compact
- The level limit switch Capcont LS is suitable for limit value detection of also as dry run protection in liquids and viscous substances and also in powdery and fine granular substances. Like e.g. grain, flour, powdered milk, mixing food, cement, chalk or gypsum.
- It can be used in electrically conductive as well as in non-conductive materials.
- The device is certificated for the use as overflow protection acc. to WHG.
- Capcont LS with integrated evaluation electronic is a compact filling level limit switch for supervision of filling levels.
- Application
- liquids and solids within container or pipes
- also in explosive hazardous areas
- process temperatures from – 40°C to +140°C
- process pressures from –1 up to 10 bar.
- with metallic gasket and rod isolation in PEEK is especially suitable for the use in hygienic applications
- Function
- The device is a capacitive operating sensor for limit value detection. Electrode rod, filling material and container wall creates an electrical capacitor. The contact of the electrode rod with the filling material produces a variation in capacity. That is evaluated by the electronic and converted in a correspondent switching action.
- The detection of a filling level signal is indicated at the plug side of the device by a yellow LED and converted into a switching command and output at the PNP switching output. This allows the drive of relays, contactors, magnetic vents, optical indicators, horns as well as of SPS inputs.
- At a switching reaction, the voltage of the connection terminal 1 (+L) is output alternating by two contrary operated semiconductor switches at two connection terminals. The adjustment of the responsitivity of the device to the respective filling material is done by a potentiometer.
- Capcont LS is mounted from the top side of the pressure container or of the pipe. Capcont LL is mounted from the top side or into the side wall of the pressure container or of the pipe.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site