Product Datasheet
ExTVA-600-U0
Model: ExTVA-600-U0
| Category | Interface and Signal Converters |
| Brand | ACS |
| Model | ExTVA-600-U0 |
ACS-Control-System Ex Isolating Transducer: ExTVA-600-U0.
- Safe supply in the ATEX area
- HART signals can be transmitted
- 3x galvanic isolated
MAIN FEATURES
Auxiliary power, wide-range power supply, flexible voltage supply
Bidirectional HART® transmission
HART® communication sockets for sensor parameterisation
Compact side-by-side housing
Sensor power supply for 4…20mA devices
Compact DIN rail housing 22.5mm
20…253 V AC/DC wide-range power supply
Suitable for connection of intrinsically safe devices Ex Zone 2 [ec]
APPLICATION
Galvanic isolation of 4…20 mA circuits
Elimination of ground loops
Power supply for 2-wire transducers
The active barrier is used for the transmission and galvanic isolation of 0/4 to 20 mA/ HART signals. The device has an active/passive current input to which a 2- or 4-wire transmitter can be directly connected. The output of the device can be operated actively or passively. The current signal is then available to the PLC / controller or to other instrumentation at plug-in screw terminals or optional push-in terminals.
HART communication signals are transmitted bidirectionally by the device. Connection sockets for connecting HART communicators are integrated into the front of the device.
The device is optionally available as an „associated apparatus“, which allows devices to be connected in Ex Zone 0/20 [ia] and operated in Ex Zone 2 [ec]. 2-wire transmitters are supplied with power, and transmit analog 0/4 to 20 mA/HART measured values from the hazardous area to the non-hazardous area.
Technical specifications
| General | Product type | Ex Isolating Transducer |
| General | Manufacturer categories | Transducer, Input separator |
InfiSense Technologies Co., Ltd.
Printed: 20 November 2026
Information may change — please check with our team.