Illustration — the actual product may differ
Interface and Signal ConvertersTemperature Transmitter Transcont (Ex) KTM (Transcont Ex KTM)
Product codeTranscont Ex KTM
- Type
- Temperature Transmitter
- Product type
- Temperature Transmitter
- Manufacturer categories
- Transducer, Temperature transmitter
General
- Product type
- Temperature Transmitter
- Manufacturer categories
- Transducer, Temperature transmitter
ACS Temperature Transmitter · Simple installation in the connection head of the Pt-100 · Suitable for use in the ATEX area · Easiest commissioning
- ACS-Control-System Temperature Transmitter: Transcont (Ex) KTM.
- Simple installation in the connection head of the Pt-100
- Suitable for use in the ATEX area
- Easiest commissioning
- The temperature head transmitter Transcont KTM , for connection to a Pt100 resistance thermometer is a temperature signal converter for measuring, converting and monitoring temperatures in the range from -100 ° C to + 600 ° C with a measuring range between 20 Kelvin and 700 Kelvin.
- Thanks to the PNP switching output integrated in the 2-wire version (4 … 20 mA), separate evaluation devices can be dispensed with in many cases.
- Funktion
- The temperature head transmitter Transcont KTM can be installed in a connection head (form B) or in a field housing.
- A constant current is impressed from an integrated current source through a 2- or 3-wire Pt100 resistor built into the sensor. This current causes a voltage drop across the Pt100, which increases or decreases depending on the level of the medium temperature to be measured.
- The resistance-proportional voltage signal generated on the Pt100 is recorded by the transmitter, linearized and converted into a direct current signal of 4 … 20mA or a direct voltage signal of 0 … 10V.
- The voltage signal of the Pt100 is monitored and if the sensor breaks, failure information is provided via the 4 … 20 mA or 0 … 10V output signal. In this case, the output signal rises to 21.7 mA or 10.85 V. In the event of a sensor short-circuit, the signal drops to 3.55 mA or 0 V.
- With the temperature head transmitter in 2-wire technology with 4 … 20 mA, a freely adjustable, overload and short-circuit-proof PNP switching output using the open-circuit principle is optionally integrated.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site