← Back to product|Datasheet: Ultrasonic double sheet sensor dbk+4, M18 transmitter + receiver, 2 x PNP (double / missing sheet), cable 2 m dbk+4/3CDD/M18 E+S
Product Datasheet
Ultrasonic double sheet sensor dbk+4, M18 transmitter + receiver, 2 x PNP (double / missing sheet), cable 2 m
Model: dbk+4/3CDD/M18 E+S
| Category | Ultrasonic Sensors |
| Brand | Microsonic |
| Model | dbk+4/3CDD/M18 E+S |
Ultrasonic double sheet sensor dbk+4/3CDD/M18 E+S, cylindrical M18, transmitter and receiver.
Suited for double sheet detection of paper, cardboard and foils; faultless distinction between single and double layers.
Working range: papers with weights of 20 - 2,000 g/m², Washi, metal-laminated sheets and films up to 0.4 mm thick, self-adhesive films, sheet metals up to 0.3 mm thick, fine corrugated card, wafers, PCBs.
Outputs: double sheet output and missing sheet output (pnp); transmitter/receiver spacing 20 - 60 mm; optimal: 40 mm ± 3 mm.
Operating voltage 20–30 V DC, 2 m PUR cable, IP65, operating temperature +5°C to +60°C.
Technical specifications
| General | Type | Ultrasonic double sheet sensor |
| General | Design | cylindrical M18 |
| General | Series | dbk+4 |
| General | Operating mode | double sheet control |
| General | Particularities | distance between transmitter and receiver can be selected; cable connection |
| Electrical | Input 1 | control input |
| Electrical | Input 2 | control input |
| Electrical | Input 3 | control input |
| Electrical | Output 1 | double sheet output; pnp: Imax = 200 mA (UB-2V); NOC/NCC adjustable, short-circuit-proof |
| Electrical | Output 2 | missing sheet output; pnp: Imax = 200 mA (UB-2V); NOC/NCC adjustable, short-circuit-proof |
| Electrical | Control input | < -UB+18 V: logic 1; > -UB+13 V or control input open: logic 0 |
| Electrical | Response delay | < 500 µs in trigger mode, 2.5 ms in free-run mode |
| Electrical | Voltage ripple | ± 10 % |
| Electrical | Switch-off delay | until next edge in trigger mode, 2.5 ms in free-run mode |
| Electrical | Transmitter cable | at the receiver: 1.2 m PUR cable, at the transmitter: 1 m PUR cable with M8 initiator plug |
| Electrical | Type of connection | 2 m PUR cable, 7 x 0.14 mm² |
| Electrical | Operating voltage UB | 20 - 30 V d.c., reverse polarity protection |
| Electrical | Delay prior to availability | < 300 ms |
| Electrical | No-load current consumption | ≤ 50 mA |
| Mechanical | Weight | 130 g |
| Mechanical | Housing material | brass sleeve, nickel-plated, plastic parts, PBT, PA |
| Mechanical | Degree of protection | IP65 |
| Mechanical | Ultrasonic transducer | polyurethane foam, epoxy resin with glass contents |
| Mechanical | Transmitter/receiver spacing | 20 - 60 mm; optimal: 40 mm ± 3 mm |
| Mechanical | Permissible angular deviation | ± 45° from the perpendicular to the sheet |
| Mechanical | Max. tightening torque of nuts | 15 Nm |
| Operation | Controls | control input |
| Operation | Settings | working range selection via control inputs; Teach-in via control inputs; LCA-2 with LinkControl |
| Operation | Indicators | 1 x Duo-LED; green: working / red: double sheet / flashing red: missing sheet |
| Environment | Storage temperature | -40°C to +85°C |
| Environment | Operating temperature | +5°C to +60°C |
| Ultrasonic | Blind zone | 7 mm in front of transmitter and receiver |
| Ultrasonic | Working range | papers with weights of 20 - 2,000 g/m², Washi, metal-laminated sheets and films up to 0.4 mm thick, self-adhesive films, sheet metals up to 0.3 mm thick, fine corrugated card, wafers, PCBs |
| Ultrasonic | Means of measurement | pulse operation with amplitude evaluation |
| Ultrasonic | Transducer frequency | 400 kHz |
InfiSense Technologies Co., Ltd.
Printed: 20 November 2026
Information may change — please check with our team.