← Back to product|Datasheet: Ultrasonic sensor pico+, M18, 20–250 mm, 1 x Push-Pull (IO-Link) pico+15/F/A
Product Datasheet
Ultrasonic sensor pico+, M18, 20–250 mm, 1 x Push-Pull (IO-Link)
Model: pico+15/F/A
| Category | Ultrasonic Sensors |
| Brand | Microsonic |
| Model | pico+15/F/A |
Ultrasonic sensor pico+15/F/A, cylindrical M18, measuring range 20–250 mm (operating range 150 mm).
M18 ultrasonic sensor: 4 ranges, 3 operating modes.
1 Push-Pull switching output (pnp or npn basis) with IO-Link interface Version 1.1 and Smart Sensor Profile.
Operating modes: proximity switch/reflective mode, reflective barrier, window mode.
Automatic synchronisation and multiplex operation for simultaneous operation of up to ten sensors in close quarters.
Operating voltage 10–30 V DC, connection M12, 5-pin, IP67, operating temperature -25°C to +70°C.
Technical specifications
| General | Type | Ultrasonic sensor |
| General | Design | cylindrical M18 |
| General | Series | pico+ |
| General | Operating mode | IO-Link; proximity switch/reflective mode; reflective barrier; window mode |
| General | Particularities | IO-Link Version 1.1; Smart Sensor Profile; UL Listed |
| Electrical | Input 1 | com input; synchronisation input; teach-in input |
| Electrical | Output 1 | switching output; Push-Pull, UB-3 V, -UB+3 V,Imax = 100 mA |
| Electrical | Response delay | 32 ms |
| Electrical | Voltage ripple | ± 10 % |
| Electrical | Type of connection | 5-pin M12 initiator plug |
| Electrical | Switching frequency | 25 Hz |
| Electrical | Operating voltage UB | 10 - 30 V d.c., reverse polarity protection |
| Electrical | Switching hysteresis | 2.0 mm |
| Electrical | Delay prior to availability | < 300 ms |
| Electrical | No-load current consumption | ≤ 40 mA |
| Mechanical | Weight | 30 g |
| Mechanical | Housing material | brass sleeve, nickel-plated, plastic parts, PBT |
| Mechanical | Degree of protection | IP67 |
| Mechanical | Ultrasonic transducer | polyurethane foam, epoxy resin with glass contents |
| Mechanical | Max. tightening torque of nuts | 15 Nm |
| Operation | Controls | com input |
| Operation | Settings | IO-Link; LCA-2 with LinkControl; Teach-in via com input on pin 5 |
| Operation | Multiplex | Yes |
| Operation | Indicators | 1 x LED green: working, 1 x LED yellow: switch status |
| Operation | Synchronization | Yes |
| Operation | Temperature compensation | Yes |
| Environment | Storage temperature | -40°C to +85°C |
| Environment | Operating temperature | -25°C to +70°C |
| IO-Link | COM mode | COM2 (38.4 kBaud) |
| IO-Link | Product ID | 12500 |
| IO-Link | IODD version | IODD version 1.1 |
| IO-Link | Min. cycle time | 8 ms |
| IO-Link | SIO mode support | Yes |
| IO-Link | Process data format | 32 Bit PDI |
| IO-Link | Process data content | Bit 0: initial state Pin 4; Bit 8-15: scale (Int. 8); Bit 16-31: measured value (Int. 16) |
| IO-Link | Smart Sensor Profile | Yes |
| Ultrasonic | Accuracy | ± 1 % (temperature drift internally compensated) |
| Ultrasonic | Blind zone | 20 mm |
| Ultrasonic | Max. range | 250 mm |
| Ultrasonic | Resolution | 0.10 mm |
| Ultrasonic | Measuring range | 20 - 250 mm |
| Ultrasonic | Operating range | 150 mm |
| Ultrasonic | Reproducibility | ± 0.15 % |
| Ultrasonic | Means of measurement | echo propagation time measurement |
| Ultrasonic | Transducer frequency | 380 kHz |
InfiSense Technologies Co., Ltd.
Printed: 20 November 2026
Information may change — please check with our team.