Illustration — the actual product may differ
Power SuppliesSwitch-mode Power Supply PRO MAX 120W 12V 10A, 12 V DC ± 1 % (1478230000)
Product code1478230000
- Output power
- 120 W
- Type
- PRO MAX 120W 12V 10A
- Series
- PROmax
- MTBF
- According to Standard: SN 29500 Operating time (hours), min.: 1,500,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 89%
General
- Type
- PRO MAX 120W 12V 10A
- Series
- PROmax
General data
- MTBF
- According to Standard: SN 29500 Operating time (hours), min.: 1,500,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 89%
- Short-circuit protection
- Yes
- Mounting position, installation notice
- Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Electrical safety (applied standards)
- Safety extra-low voltage
- SELV acc. to IEC 60950-1 PELV according to EN 60204-1 SELV according to EN 62368-1
Output
- Output power
- 120 W
- Connection system
- Screw connection
- Output voltage, max.
- 15 V
- Output voltage, min.
- 10 V
- Output voltage, note
- (adjustable via potentiometer)
- Rated output voltage
- 12 V DC ± 1 %
- Parallel connection option
- yes, max. 5
- Residual ripple, breaking spikes
- <50 mVss @ UNenn, Full Load
Connection data (input)
- Connection system
- Screw connection
- Number of terminals
- 3 for L/N/PE
- Conductor cross-section, rigid , max.
- 6 mm²
- Conductor cross-section, rigid , min.
- 0.18 mm²
- Conductor cross-section, flexible , min.
- 0.22 mm²
- Conductor cross-section input (AWG), max.
- 10 AWG
- Conductor cross-section (AWG) (input), min.
- 26 AWG
Connection data (output)
- Connection system
- Screw connection
- Conductor cross-section, rigid , max.
- 6 mm²
- Conductor cross-section, rigid , min.
- 0.5 mm²
- Conductor cross-section, flexible , max.
- 4 mm²
- Conductor cross-section (AWG) (output), max.
- 12 AWG
- Conductor cross-section (AWG) (output) , min.
- 26 AWG
Dimensions and weights
- Depth
- 125 mm
- Width
- 40 mm
- Height
- 130 mm
- Net weight
- 850 g
EMC / shock / vibration
- Shock resistance IEC 60068-2-27
- 30 g in all directions
- Interference immunity test acc. to
- EN 55024 EN 55032 IEC61000-3-2,-3 IEC61000-4-2,-3,-4,-5,-6,-8,-11
- Vibration resistance IEC 60068-2-6
- 2.3 g
- Noise emission in accordance with EN55032
- Class B
Input
- Inrush current
- max. 15 A
- Connection system
- Screw connection
- Frequency range AC
- 45…65 Hz
- Rated input voltage
- 100...240 V AC
- AC input voltage range
- 85…277 V AC
- Recommended back-up fuse
- 6 A, Char. B, circuit breaker 6 A, char. C circuit breaker
- Power consumption, nominal
- 134.8 VA
- Current consumption in relation to the input voltage
- Voltage type: AC Input voltage: 230 V Input current: 1 A Voltage type: DC Input voltage: 120 V Input current: 1.5 A
Insulation coordination
- Insulation voltage (input / earth)
- 3.5 kV
- Insulation voltage (input / output)
- 4 kV
- Insulation voltage (output / earth)
- 0.5 kV
Temperatures
- Storage temperature
- -40 °C...85 °C
- Operating temperature
- -25 °C...70 °C
Weidmüller PROmax · PRO MAX 120W 12V 10A · 120 W · 12 V DC ± 1 % · 10 A @ 60 °C · input 100...240 V AC · Screw connection · IP20
- Weidmüller PROmax switch-mode power supply PRO MAX 120W 12V 10A (order no. 1478230000). Power supply, switch-mode power supply unit, 12 V.
- PROmax offers diverse solutions for demanding automation. Our high performance and durable PROmax switch-mode power supply units are designed for especially demanding requirements. PROmax reliably copes with continuous overload of up to 20% or short-term peak loads of 300% occurring with high control cabinet temperatures. High boost capability and full power are also made possible in a wide temperature range. Our switch-mode power supply units can be used around the world and are also suitable for confined spaces thanks to their low width. Together with our uninterruptible DC USPs, the diode modules or CAP modules, you can create a power supply solution that is tailored to your requirements.
- Output 120 W 12 V DC ± 1 % 10 A @ 60 °C; rated input 100...240 V AC; efficiency 89%; operating temperature -25 °C...70 °C; IP20.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site