Skip to content
2467250000

Illustration — the actual product may differ

Weidmüller

Power SuppliesSwitch-mode Power Supply PRO TOP2 240W 24V 10A UW, 24 V DC ± 1 % (2467250000)

Product code2467250000
Output power
240 W
Type
PRO TOP2 240W 24V 10A UW
Series
PROtop
MTBF
According to Standard: SN 29500 Operating time (hours), min.: 1,399,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 240 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 642,700 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 240 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
91.5%
See all specifications ↓
LINE

General

Type
PRO TOP2 240W 24V 10A UW
Series
PROtop

General data

MTBF
According to Standard: SN 29500 Operating time (hours), min.: 1,399,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 240 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 642,700 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 240 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
91.5%
Mounting position, installation notice
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies.

Electrical safety (applied standards)

Safety extra-low voltage
SELV acc. to IEC 60950-1 PELV according to EN 60204-1 SELV according to EN 62368-1

Output

Output power
240 W
Connection system
PUSH IN with actuator
Output voltage, max.
28.8 V
Output voltage, min.
22.5 V
Output voltage, note
adjustable with potentiometer or comunication module
Rated output voltage
24 V DC ± 1 %
Parallel connection option
Yes, for redundancy and power increase (with ORing MOSFET)
Residual ripple, breaking spikes
< 50 mVss @ UNenn, Full Load

Connection data (input)

Connection system
PUSH IN
Number of terminals
3 for L/N/PE
Conductor cross-section, rigid , max.
2.5 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section input (AWG), max.
12 AWG
Conductor cross-section (AWG) (input), min.
26 AWG

Connection data (output)

Connection system
PUSH IN with actuator
Conductor cross-section, rigid , max.
2.5 mm²
Conductor cross-section, rigid , min.
0.2 mm²
Conductor cross-section, flexible , max.
2.5 mm²
Conductor cross-section (AWG) (output), max.
12 AWG
Conductor cross-section (AWG) (output) , min.
20 AWG

Dimensions and weights

Depth
125 mm
Width
50 mm
Height
130 mm
Net weight
1,050 g

EMC / shock / vibration

Shock resistance IEC 60068-2-27
30 g in all directions
Interference immunity test acc. to
EN 55032:2015 EN 61000-3-2:2019 IEC 61000-4-4:2012 IEC 61000-4-5:2014 IEC 61000-4-6:2013 IEC 61000-4-8:2009 IEC 61000-4-11:2004 EN 61000-6-3:2007/A1:2011 EN 61000-6-4:2007/A1:2011 EN 61000-3-3:2013+A1:2019 EN 55035:2017 EN 61000-6-1:2019 EN 61000-6-2:2019 IEC 61000-4-2:2008 IEC 61000-4-3:2006+A1:2007+A2:2010
Vibration resistance IEC 60068-2-6
2.3 g (on DIN rail) 4 g (with direct mounting)
Noise emission in accordance with EN55032
Class B

Input

Inrush current
Max. 10 A
Connection system
PUSH IN
Frequency range AC
45…65 Hz
Rated input voltage
100 - 500 V AC / 120 - 500 V DC
AC input voltage range
85...550 V AC
Recommended back-up fuse
5 A, DI / 6 A, Char. B / 6 A, Char C
Power consumption, nominal
262.3 VA
Current consumption in relation to the input voltage
Voltage type: AC Input voltage: 85 V Input current: 3.6 A

Insulation coordination

Insulation voltage (input / earth)
3.2 kV
Insulation voltage (input / output)
3.5 kV
Insulation voltage (output / earth)
0.5 kV

Temperatures

Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...75 °C

How to order

  1. 1Send a quote requestList the product codes and quantities you need
  2. 2Receive the quotationOur team checks the request and sends you a quotation
  3. 3Delivery / installationConfirm the order, then we deliver or install on site

Can't find a product? Send us the product code and we'll source it

LINE