Skip to content
2580190000

Illustration — the actual product may differ

Weidmüller

Power SuppliesSwitch-mode Power Supply PRO INSTA 30W 24V 1.3A, 24 V DC ± 1 % (2580190000)

Product code2580190000
Output power
30 W
Type
PRO INSTA 30W 24V 1.3A
Series
INSTA POWER
MTBF
According to Standard: Telcordia SR-332 Operating time (hours), min.: 1,143,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 30 W Duty cycle: 100 % According to Standard: Telcordia SR-332 Operating time (hours), min.: 532,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 30 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
86%
See all specifications ↓
LINE

General

Type
PRO INSTA 30W 24V 1.3A
Series
INSTA POWER

General data

MTBF
According to Standard: Telcordia SR-332 Operating time (hours), min.: 1,143,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 30 W Duty cycle: 100 % According to Standard: Telcordia SR-332 Operating time (hours), min.: 532,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 30 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
86%
Short-circuit protection
Yes internal
Mounting position, installation notice
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load

Electrical safety (applied standards)

Safety extra-low voltage
SELV acc. to IEC 61010-1 PELV acc. to IEC 61010-2-201

Output

Output power
30 W
Connection system
PUSH IN
Output voltage, max.
28 V
Output voltage, min.
22 V
Output voltage, note
(adjustable via potentiometer on front)
Rated output voltage
24 V DC ± 1 %
Residual ripple, breaking spikes
<50 mVss @ UNenn, Full Load

Connection data (input)

Connection system
PUSH IN with actuator
Number of terminals
2 (L,N)
Conductor cross-section, rigid , max.
2.5 mm²
Conductor cross-section, rigid , min.
0.25 mm²
Conductor cross-section, flexible , min.
0.25 mm²
Conductor cross-section input (AWG), max.
12 AWG
Conductor cross-section (AWG) (input), min.
24 AWG

Connection data (output)

Connection system
PUSH IN
Conductor cross-section, rigid , max.
2.5 mm²
Conductor cross-section, rigid , min.
0.25 mm²
Conductor cross-section, flexible , max.
2.5 mm²
Conductor cross-section (AWG) (output), max.
12 AWG
Conductor cross-section (AWG) (output) , min.
24 AWG

Dimensions and weights

Depth
60 mm
Width
54 mm
Height
90 mm
Net weight
192 g

EMC / shock / vibration

Shock resistance IEC 60068-2-27
15 g In all directions
Interference immunity test acc. to
EN 61000-4-2 (ESD)/EN 61000-4-3 and EN 61000-4-8 (fields)/EN 61000-4-4 (burst)/EN 61000-4-5 (surge)/EN 61000-4-6 (conducted)/EN 61000-4-11 (dips) EN 61000-4-11 (Dips)
Vibration resistance IEC 60068-2-6
2.3 g
Noise emission in accordance with EN55032
Class B

Input

Inrush current
max. 40 A
Connection system
PUSH IN with actuator
Frequency range AC
45…65 Hz
Rated input voltage
110...240 V AC / 120...340 V DC
AC input voltage range
85...264 V AC (derating at 100 V AC)
Recommended back-up fuse
2 A / DI, safety fuse6 A, Char. B, circuit breaker2...4 A, Char. C circuit breaker
Power consumption, nominal
34.9 VA

Insulation coordination

Insulation voltage (input / earth)
3.5 kV
Insulation voltage (input / output)
4 kV
Insulation voltage (output / earth)
0.5 kV

Temperatures

Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C

How to order

  1. 1Send a quote requestList the product codes and quantities you need
  2. 2Receive the quotationOur team checks the request and sends you a quotation
  3. 3Delivery / installationConfirm the order, then we deliver or install on site

Can't find a product? Send us the product code and we'll source it

LINE