Illustration — the actual product may differ
Power SuppliesSwitch-mode Power Supply PRO INSTA 90W 24V 3.8A, 24 V DC ± 1 % (2580250000)
Product code2580250000
- Output power
- 90 W
- Type
- PRO INSTA 90W 24V 3.8A
- Series
- INSTA POWER
- MTBF
- According to Standard: Telcordia SR-332 Operating time (hours), min.: 619,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 90 W Duty cycle: 100 % According to Standard: Telcordia SR-332 Operating time (hours), min.: 293,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 90 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 87 %
General
- Type
- PRO INSTA 90W 24V 3.8A
- Series
- INSTA POWER
General data
- MTBF
- According to Standard: Telcordia SR-332 Operating time (hours), min.: 619,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 90 W Duty cycle: 100 % According to Standard: Telcordia SR-332 Operating time (hours), min.: 293,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 90 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 87 %
- Short-circuit protection
- Yes internal
- Mounting position, installation notice
- Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Electrical safety (applied standards)
- Safety extra-low voltage
- SELV acc. to IEC 61010-1 PELV acc. to IEC 61010-2-201
Output
- Output power
- 90 W
- Connection system
- PUSH IN
- Output voltage, max.
- 25 V
- Output voltage, min.
- 22 V
- Output voltage, note
- (adjustable via potentiometer on front)
- Rated output voltage
- 24 V DC ± 1 %
- Residual ripple, breaking spikes
- <50 mVss @ UNenn, Full Load
Connection data (input)
- Connection system
- PUSH IN with actuator
- Number of terminals
- 2 (L,N)
- Conductor cross-section, rigid , max.
- 2.5 mm²
- Conductor cross-section, rigid , min.
- 0.25 mm²
- Conductor cross-section, flexible , min.
- 0.25 mm²
- Conductor cross-section input (AWG), max.
- 12 AWG
- Conductor cross-section (AWG) (input), min.
- 24 AWG
Connection data (output)
- Connection system
- PUSH IN
- Conductor cross-section, rigid , max.
- 2.5 mm²
- Conductor cross-section, rigid , min.
- 0.25 mm²
- Conductor cross-section, flexible , max.
- 2.5 mm²
- Conductor cross-section (AWG) (output), max.
- 12 AWG
- Conductor cross-section (AWG) (output) , min.
- 24 AWG
Dimensions and weights
- Depth
- 60 mm
- Width
- 90 mm
- Height
- 90 mm
- Net weight
- 360 g
EMC / shock / vibration
- Shock resistance IEC 60068-2-27
- 15 g In all directions
- Interference immunity test acc. to
- EN 61000-4-2 (ESD)/EN 61000-4-3 and EN 61000-4-8 (fields)/EN 61000-4-4 (burst)/EN 61000-4-5 (surge)/EN 61000-4-6 (conducted)/EN 61000-4-11 (dips) EN 61000-4-11 (Dips)
- Vibration resistance IEC 60068-2-6
- 2.3 g
- Noise emission in accordance with EN55032
- Class B
Input
- Inrush current
- max. 40 A
- Connection system
- PUSH IN with actuator
- Frequency range AC
- 45…65 Hz
- Rated input voltage
- 110...240 V AC / 120...340 V DC
- AC input voltage range
- 85...264 V AC (derating at 100 V AC)
- Recommended back-up fuse
- 2 A / DI, safety fuse6 A, Char. B, circuit breaker2...4 A, Char. C circuit breaker
- Power consumption, nominal
- 103.4 VA
Insulation coordination
- Insulation voltage (input / earth)
- 3.5 kV
- Insulation voltage (input / output)
- 4 kV
- Insulation voltage (output / earth)
- 0.5 kV
Temperatures
- Storage temperature
- -40 °C...85 °C
- Operating temperature
- -25 °C...70 °C
Weidmüller INSTA POWER · PRO INSTA 90W 24V 3.8A · 90 W · 24 V DC ± 1 % · 3.8 A @ 55 °C · input 110...240 V AC / 120...340 V DC · PUSH IN with actuator · IP20
- Weidmüller INSTA POWER switch-mode power supply PRO INSTA 90W 24V 3.8A (order no. 2580250000). Power supply, switch-mode power supply unit, 24 V.
- The single-phase INSTA-POWER switching power supplies are characterised by a wide power spectrum, compact design and good value for money. They are suitable for temperature ranges from -25°C to +70°C, have international approvals and a wide voltage input range. This makes them suitable for a wide range of applications. This also includes signal and telecommunications systems as well as automation systems with a low power requirement up to 96 Watt.
- Output 90 W 24 V DC ± 1 % 3.8 A @ 55 °C; rated input 110...240 V AC / 120...340 V DC; efficiency 87 %; operating temperature -25 °C...70 °C; IP20.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site