Product Datasheet
PoE Device IE-SW-EL06-4POE-2SC (2682390000)
Model: 2682390000
| Category | Industrial Ethernet Switches |
| Brand | Weidmüller |
| Model | 2682390000 |
Weidmüller PoE Device IE-SW-EL06-4POE-2SC (order no. 2682390000). Network switch, unmanaged PoE, Fast Ethernet, Number of ports: 4x RJ45 10/100 BaseT(X) PoE+, 2x SC Multi-mode, IP30, -40 °C...75 °C.
Our PoE devices provide a reliable and efficient solution for powering and networking Ethernet-enabled devices via a single cable. The product range includes PoE injectors as well as managed and unmanaged PoE switches, making it ideal for applications such as IP cameras, wireless access points, VoIP phones, and industrial network infrastructures. Power and Data over One Cable: Supporting IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt standards, our PoE devices deliver both power and data through a single Ethernet cable. This reduces installation effort, lowers cabling costs, and enables flexible device placement. Flexible Network Expansion: From simple unmanaged PoE switches for plug-and-play operation to managed PoE switches with advanced functions such as VLAN, QoS, and port monitoring, our portfolio offers the right solution for a wide range of networking requirements. Reliable Power Delivery: Intelligent power management and high-performance PoE budgets ensure a stable and efficient power supply for connected devices. Robust industrial-grade design provides dependable operation even in demanding environments.
Technical specifications
| General | Product group | PoE Device |
| General ordering data | Version | Network switch, unmanaged PoE, Fast Ethernet, Number of ports: 4x RJ45 10/100 BaseT(X) PoE+, 2x SC Multi-mode, IP30, -40 °C...75 °C |
| Interfaces | RJ45 ports | 10/100BaseT(X) auto negotiation Full-/half-duplex mode Auto MDI/MDI-X port |
| Interfaces | LED indicator | Power LED: PWR1, PWR2 FAULT Port LED: LNK/ACT, PoE active 100M (fibre-optic port). |
| Interfaces | Number of ports | 4x RJ45 10/100 BaseT(X) PoE+ 2x SC Multi-mode |
| Interfaces | Fibre-optic ports | 100BaseFX ports (SC connector) Multimode |
| Interfaces | Function DIP switch | 2x for enabling/disabling power fault alarm via relay |
| Environmental conditions | Humidity | 5 to 95 % (non-condensing) |
| Environmental conditions | Operating altitude | Altitude, max.: 2,000 m Note: in acc. with UL Altitude, max.: 6,000 m Note: for restrictions, see the manufacturer's declaration for operating altitude in section downloads |
| Environmental conditions | Storage temperature, max. | 85 °C |
| Environmental conditions | Storage temperature, min. | -40 °C |
| Environmental conditions | Operating temperature, max. | 75 °C |
| Environmental conditions | Operating temperature, min. | -40 °C |
| Dimensions and weights | Depth | 94.9 mm |
| Dimensions and weights | Width | 41 mm |
| Dimensions and weights | Height | 144.3 mm |
| Dimensions and weights | Net weight | 680 g |
| EMC conformity and approvals | Shock | according to IEC 60068-2-27 |
| EMC conformity and approvals | Free fall | According to IEC 60068-2-31 |
| EMC conformity and approvals | Vibration | according to IEC 60068-2-6 |
| EMC conformity and approvals | EMC standards | EN 55032 EN 55024 CISPR 32 FCC Part 15 Subpart B Class A IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz bis 1 Ghz: 3 V/m IEC 61000-4-4 EFT: Power: 0.5 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 0,5 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 Vrms |
| EMC conformity and approvals | Safety standard | UL 61010-1 UL 61010-2-201 |
| Fibre optic transceiver characteristics | Connector type | SC-Duplex |
| Fibre optic transceiver characteristics | Transceiver type | Multimode |
| Fibre optic transceiver characteristics | Transmission rate | 100 Mbps |
| MTBF | MTBF | According to Standard: Telcordia SR-332 Operating time (hours), min.: 538,904 h |
| Power supply | Supply voltage | 24/48 V DC 2 redundant inputs |
| Power supply | Connection type | 1 removable 6-pin terminal block |
| Power supply | Current consumption | Voltage: 24 V Current: 2.8 A Voltage: 57 V Current: 2.2 A |
| Power supply | Voltage supply range | Voltage type: DC Voltage, min.: 24 V Voltage, max.: 57 V |
| Power supply | Overload current protection | Yes |
| Power supply | Reverse polarity protection | Yes |
| Switch characteristics | MAC table size | 1 K |
| Switch characteristics | Packet buffer size | 448 kbit |
| Switch characteristics | Bandwidth backplane | 1.2 Gbit/s |
| Technical data | Speed | Fast Ethernet |
| Technical data | Switch | unmanaged PoE |
| Technical data | Type of mounting | DIN rail |
| Technical data | Protection degree | IP30 |
| Technical data | Housing main material | Metal |
| Technology | Standard | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control IEEE 802.3at/af for Power-over-Ethernet |
| Technology | Flow control | IEEE 802.3x flow control |
| Technology | Data switching | Store and Forward |
| Temperatures | Humidity | 5 to 95 % (non-condensing) |
| Temperatures | Storage temperature | -40 °C...85 °C |
| Temperatures | Operating temperature | -40 °C...75 °C |
InfiSense Technologies Co., Ltd.
Printed: 20 November 2026
Information may change — please check with our team.