Skip to content
2682420000

Illustration — the actual product may differ

Weidmüller

Industrial Ethernet SwitchesPoE Device IE-SW-AL08M-8GTPOE (2682420000)

Product code2682420000
Product group
PoE Device
Version
Network switch, managed PoE, Gigabit Ethernet, IEC 62443-4-2 certified, Number of ports: 8x RJ45 10/100/1000 BaseT(X) PoE+, IP30, -40 °C...75 °C
RJ45 ports
10/100/1000BaseT(X) auto negotiation Full-/half-duplex mode Auto MDI/MDI-X port
Number of ports
8x RJ45 10/100/1000 BaseT(X) PoE+
Humidity
5 to 95 % (non-condensing)
Operating altitude
Altitude, max.: 2,000 m Note: in acc. with UL Altitude, max.: 6,000 m Note: for restrictions, see the manufacturer's declaration for operating altitude in section downloads
See all specifications ↓
LINE

General

Product group
PoE Device

General ordering data

Version
Network switch, managed PoE, Gigabit Ethernet, IEC 62443-4-2 certified, Number of ports: 8x RJ45 10/100/1000 BaseT(X) PoE+, IP30, -40 °C...75 °C

Interfaces

RJ45 ports
10/100/1000BaseT(X) auto negotiation Full-/half-duplex mode Auto MDI/MDI-X port
Number of ports
8x RJ45 10/100/1000 BaseT(X) PoE+

Environmental conditions

Humidity
5 to 95 % (non-condensing)
Operating altitude
Altitude, max.: 2,000 m Note: in acc. with UL Altitude, max.: 6,000 m Note: for restrictions, see the manufacturer's declaration for operating altitude in section downloads
Storage temperature, max.
85 °C
Storage temperature, min.
-40 °C
Operating temperature, max.
75 °C
Operating temperature, min.
-40 °C

Dimensions and weights

Depth
120 mm
Width
54.3 mm
Height
145.1 mm
Net weight
915 g

EMC conformity and approvals

Shock
according to IEC 60068-2-27
Free fall
According to IEC 60068-2-31
Vibration
according to IEC 60068-2-6
EMC standards
EN 55032 EN 55035 FCC Part 15 Subpart B Class A IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz - 5 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 0.5 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 0,5 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8
Safety standard
UL 61010-1 UL 61010-2-201

Management features

Network traffic filter
Quality of Service (QoS) Tag based VLAN GVRP (GARP VLAN Registration Protocol) IGMP v2/v3 Traffic Rate Limiting Differentiated Services Code Point (DSCP) IGMP Snooping MLD Snooping MLD v1/v2
Industrial protocol support
PROFINET device acc. to conformance class B EtherNet/IP Modbus/TCP slave

MTBF

MTBF
According to Standard: Telcordia SR-332 Operating time (hours), min.: 495,670 h

Power supply

Supply voltage
12/24/48 V DC 2 redundant inputs
Connection type
1 removable 6-pin terminal block
Current consumption
Voltage: 12 V Current consumption with Powered Device (PD): 6.53 A Current consumption without Powered Device (PD): 0.71 A Voltage: 24 V Current consumption with Powered Device (PD): 5.49 A Current consumption without Powered Device (PD): 0.36 A Voltage: 48 V Current consumption with Powered Device (PD): 2.68 A Current consumption without Powered Device (PD): 0.19 A
Voltage supply range
Voltage type: DC Voltage, min.: 12 V Voltage, max.: 57 V
Overload current protection
Yes
Reverse polarity protection
Yes

Switch characteristics

MAC table size
8 K
Priority queues
8
Packet buffer size
4 Mbit
Bandwidth backplane
16 Gbit/s

Technical data

Speed
Gigabit Ethernet
Switch
managed PoE
Type of mounting
DIN rail
Protection degree
IP30
Housing main material
Metal

Technology

Standard
IEEE 802.3 for 10BASE-T IEEE 802.3u for 100BASE-TX IEEE 802.1X for authentication IEEE 802.1AB for Link Layer Discovery protocol (LLDP) IEEE 802.3at/af for Power-over-Ethernet IEEE 802.3ab for 1000BASE-T IEEE 802.3x for flow control IEEE 802.3ad for port trunk with LACP IEEE 802.1D for the Spanning Tree protocol IEEE 802.1w for Rapid STP IEEE 802.1s for the Multiple Spanning Tree Protocol (MSTP) IEEE 802.1p for Class of Service / Quality of Service (CoS/QoS) IEEE 802.1Q for VLAN tagging
Flow control
IEEE 802.3x flow control
Data switching
Store and Forward

Temperatures

Humidity
5 to 95 % (non-condensing)
Storage temperature
-40 °C...85 °C
Operating temperature
-40 °C...75 °C

How to order

  1. 1Send a quote requestList the product codes and quantities you need
  2. 2Receive the quotationOur team checks the request and sends you a quotation
  3. 3Delivery / installationConfirm the order, then we deliver or install on site

Can't find a product? Send us the product code and we'll source it

LINE