Illustration — the actual product may differ
Power SuppliesSwitch-mode Power Supply PRO CP 20W 12V 1.6A, 12 V DC ± 3 % (3026100000)
Product code3026100000
- Output power
- 20 W
- Type
- PRO CP 20W 12V 1.6A
- Series
- PRO CP
- MTBF
- According to Standard: MLT-HDBK-217F Operating time (hours), min.: 1,000,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 20 W Duty cycle: 100 %
- Protection degree
- IP30
- Short-circuit protection
- Yes
General
- Type
- PRO CP 20W 12V 1.6A
- Series
- PRO CP
General data
- MTBF
- According to Standard: MLT-HDBK-217F Operating time (hours), min.: 1,000,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 20 W Duty cycle: 100 %
- Protection degree
- IP30
- Short-circuit protection
- Yes
- Mounting position, installation notice
- Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies. On TS 35 mounting rail, 50 mm clearance above and below for free air supply.
Electrical safety (applied standards)
- Safety extra-low voltage
- SELV according to EN 62368-1
Output
- Output power
- 20 W
- Output voltage, max.
- 12.36 V
- Output voltage, min.
- 11.64 V
- Rated output voltage
- 12 V DC ± 3 %
Connection data (input)
- Connection system
- PUSH IN with actuator
- Number of terminals
- 2 (L,N)
- Conductor cross-section, rigid , max.
- 2.5 mm²
- Conductor cross-section, rigid , min.
- 0.2 mm²
- Conductor cross-section, flexible , min.
- 0.2 mm²
- Conductor cross-section input (AWG), max.
- 12 AWG
- Conductor cross-section (AWG) (input), min.
- 26 AWG
Connection data (output)
- Conductor cross-section, rigid , max.
- 1.5 mm²
- Conductor cross-section, rigid , min.
- 0.2 mm²
- Conductor cross-section, flexible , max.
- 1.5 mm²
- Conductor cross-section (AWG) (output), max.
- 14 AWG
- Conductor cross-section (AWG) (output) , min.
- 28 AWG
Dimensions and weights
- Depth
- 29.5 mm
- Width
- 26.5 mm
- Height
- 83 mm
- Net weight
- 79 g
Input
- Inrush current
- Input voltage: 100 V Voltage type: AC Inrush current integral: 0.15 A²s Input voltage: 230 V Voltage type: AC Inrush current integral: 0.3 A²s Input voltage: 277 V Voltage type: AC Inrush current integral: 0.35 A²s
- Connection system
- PUSH IN with actuator
- Frequency range AC
- 47...63 Hz
- Rated input voltage
- 100…277 V AC
- AC input voltage range
- 85 … 305 V AC
- Power consumption, nominal
- 22.99 VA
Insulation coordination
- Insulation voltage (input / output)
- 4 kV
Temperatures
- Storage temperature
- -40 °C...90 °C
- Operating temperature
- -35 °C...50 °C
Weidmüller PRO CP · PRO CP 20W 12V 1.6A · 20 W · 12 V DC ± 3 % · input 100…277 V AC · PUSH IN with actuator · IP30
- Weidmüller PRO CP switch-mode power supply PRO CP 20W 12V 1.6A (order no. 3026100000). Power supply, switch-mode power supply unit, 12 V.
- The new PRO CP 20 W power supply unit was developed for use in buildings applications. It supplies devices that are connected to the smart meter with voltage in the 12 V or 24 V ranges. These include e.g. routers and LMN-distributors. The rating protection IP 30 and EN 60335 approval guarantee safe use without unauthorized persons coming into contact with the device. Thanks to the particularly small size of 30 millimeters, the power supply is completely hidden in the space for additional applications(RFZ).
- Output 20 W 12 V DC ± 3 % ; rated input 100…277 V AC; efficiency ; operating temperature -35 °C...50 °C; IP30.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site