Illustration — the actual product may differ
Photoelectric SensorsRetro-Reflex Sensor, 5 m, Red LED, NPN NC, M8 3-pin
Product codeP1KL010
- Sensing principle
- Retro-reflective
- Sensing range
- 1–5 m
- Output
- NPN
- Connection
- M8 connector
- Light source
- Red LED
- IO-Link
- Yes
General
- Housing
- Cuboid miniature
- Sensor type
- Retro-Reflex Sensor
Optical
- Range
- 5000 mm
- Optics
- Two-Lens Optic
- Light source
- LED, red
- Max. ambient light
- 10000 Lux
- Polarization filter
- Yes
- Reference reflector
- RQ100BA
- Switching hysteresis
- < 15 %
Electrical
- Voltage drop
- < 2 V
- Response time
- 500 µs
- Supply voltage
- 10…30 V DC
- Protection class
- III
- Switching current
- 100 mA
- Overload protection
- Yes
- Switching frequency
- 1 kHz
- Short-circuit protection
- Yes
- Current consumption (24 V)
- < 20 mA
- Reverse polarity protection
- Yes
- Supply voltage with IO-Link
- 18…30 V DC
Output
- IO-Link
- IO-Link V1.1
- Switching output
- NPN NC
- Configurable circuit
- NC, NO, NC/NO
- Configurable output type
- Push-pull, NPN, PNP
Mechanical
- Weight
- 6 g
- Connection
- M8 × 1; 3-pin
- Optic cover
- Plastic, PMMA
- Housing material
- Plastic, ABS/PC
- Degree of protection
- IP67, IP68
Setting
- Setting method
- Potentiometer
Environment
- Operating temperature
- -40…60 °C
Safety
- MTTFd (EN ISO 13849-1)
- 2827.23 a
Retro-reflex 5 m · Red LED · NPN NC · M8 3-pin · IO-Link · IP67, IP68
- The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
- Also suitable for glossy and reflective objects
- Condition monitoring
- High switching frequency
- IO-Link 1.1
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site