Product Datasheet
Retro-Reflex Sensor, 3 m, Red laser, PNP NO/NC, M8 4-pin
Model: P1KL017
| Category | Photoelectric Sensors |
| Brand | wenglor |
| Model | P1KL017 |
The retro-reflex sensor works with a fine laser beam and a reflector. The focused laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of 0.15 millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Condition monitoring
High switching frequency
IO-Link 1.1
Focused optics
Detect extremely small parts starting at 0.15 mm
Technical specifications
| General | Housing | Cuboid miniature |
| General | Sensor type | Retro-Reflex Sensor |
| Optical | Range | 3000 mm |
| Optical | Optics | Two-Lens Optic |
| Optical | Wavelength | 680 nm |
| Optical | Light source | Laser, red |
| Optical | Max. ambient light | 10000 Lux |
| Optical | Light spot diameter | 0.5 mm |
| Optical | Light spot geometry | Focused |
| Optical | Polarization filter | Yes |
| Optical | Reference reflector | RE6151BM |
| Optical | Switching hysteresis | < 15 % |
| Optical | Laser class (EN 60825-1) | 1 |
| Optical | Smallest recognizable part | 0.15 mm |
| Electrical | Voltage drop | < 2 V |
| Electrical | Response time | 0.25 ms |
| Electrical | Supply voltage | 10…30 V DC |
| Electrical | Protection class | III |
| Electrical | Switching current | 100 mA |
| Electrical | Overload protection | Yes |
| Electrical | Switching frequency | 2000 Hz |
| Electrical | Short-circuit protection | Yes |
| Electrical | Current consumption (24 V) | < 15 mA |
| Electrical | Response time (speed mode) | 0.125 ms |
| Electrical | Reverse polarity protection | Yes |
| Electrical | Supply voltage with IO-Link | 18…30 V DC |
| Electrical | Switching frequency (speed mode) | 4000 Hz |
| Output | IO-Link | IO-Link V1.1 |
| Output | Switching output | PNP NO/NC |
| Output | Configurable circuit | NC, NO, inactive, Error output, NC+NO |
| Output | Configurable output type | Push-pull, NPN, PNP |
| Mechanical | Weight | 6 g |
| Mechanical | Connection | M8 × 1; 4-pin |
| Mechanical | Optic cover | Plastic, PMMA |
| Mechanical | Housing material | Plastic, ABS/PC |
| Mechanical | Degree of protection | IP67, IP68 |
| Setting | Setting method | Potentiometer |
| Environment | Operating temperature | -40…50 °C |
| Safety | MTTFd (EN ISO 13849-1) | 2617.62 a |
InfiSense Technologies Co., Ltd.
Printed: 20 November 2026
Information may change — please check with our team.