Skip to content
← Back to product|Datasheet: Reflex Sensor with Background Suppression (electronic), 200 mm, Red LED, PNP NO, M8 4-pin, 2 switching outputs, stainless steel V4A, IP69K P2KH016
Product Datasheet

Reflex Sensor with Background Suppression (electronic), 200 mm, Red LED, PNP NO, M8 4-pin, 2 switching outputs, stainless steel V4A, IP69K

Model: P2KH016

InfiSense Technologies
Reflex Sensor with Background Suppression (electronic), 200 mm, Red LED, PNP NO, M8 4-pin, 2 switching outputs, stainless steel V4A, IP69K
CategoryPhotoelectric Sensors
Brandwenglor
ModelP2KH016
The reflex sensor with background suppression works with red light according to the angle measurement principle. It has an IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensors (PNP/NPN, NC/NO, switching distance, error output), as well as for reading out switching statuses and distance values. Two independent switching outputs can be used, for instance, to monitor minimum and maximum values of distances or fill levels and stack heights. The robust V4A (1.4404/316L) stainless steel housing is resistant to oils and coolants, as well as cleaning agent. Data storage Two independent switching outputs Robust stainless steel housing with IP69K

Technical specifications

General | HousingCuboid miniature
General | Sensor typeReflex Sensor with Background Suppression (electronic)
Optical | Range200 mm
Optical | PrincipleTriangulation
Optical | Light sourceLED, red
Optical | Setting range30…200 mm
Optical | Max. ambient light10000 Lux
Optical | Switching hysteresis< 10 %
Electrical | Voltage drop< 2 V
Electrical | Response time5 ms
Electrical | Supply voltage15…30 V DC
Electrical | Protection classIII
Electrical | Switching current100 mA
Electrical | Overload protectionYes
Electrical | Switching frequency100 Hz
Electrical | Short-circuit protectionYes
Electrical | Current consumption (24 V)< 20 mA
Electrical | Reverse polarity protectionYes
Electrical | Supply voltage with IO-Link18…30 V DC
Output | IO-LinkIO-Link V1.1
Output | Switching outputPNP NO
Output | Configurable circuitNC, NC/NO, NO
Output | Configurable output typePush-pull, NPN, PNP
Mechanical | Weight42 g
Mechanical | ConnectionM8 × 1; 4-pin
Mechanical | Optic coverPlastic, PMMA
Mechanical | Housing materialStainless steel, V4A (1.4404/316L)
Mechanical | Degree of protectionIP68, IP69K
Setting | Setting methodTeach-In
Environment | Operating temperature-40…60 °C
Safety | MTTFd (EN ISO 13849-1)1496.09 a

InfiSense Technologies Co., Ltd.

Printed: 20 November 2026

Information may change — please check with our team.

LINE