ข้ามไปเนื้อหา
← กลับหน้าสินค้า|Datasheet: Ultrasonic double sheet sensor dbk+5, M18 transmitter + receiver, 2 x PNP (double / missing sheet), cable 2 m dbk+5/3CDD/M18 E+S
Product Datasheet

Ultrasonic double sheet sensor dbk+5, M18 transmitter + receiver, 2 x PNP (double / missing sheet), cable 2 m

Model: dbk+5/3CDD/M18 E+S

InfiSense Technologies
Ultrasonic double sheet sensor dbk+5, M18 transmitter + receiver, 2 x PNP (double / missing sheet), cable 2 m
หมวดหมู่เซ็นเซอร์อัลตราโซนิก
ยี่ห้อ / BrandMicrosonic
รุ่น / Modeldbk+5/3CDD/M18 E+S
เซ็นเซอร์อัลตราโซนิกสำหรับตรวจจับแผ่นซ้อน (Double Sheet Control) รุ่น dbk+5/3CDD/M18 E+S ชุดตัวส่งและตัวรับทรงกระบอก M18 ใช้ตรวจจับแผ่นซ้อนของกระดาษ กระดาษแข็ง และฟิล์ม แยกแผ่นเดี่ยวกับแผ่นซ้อนได้อย่างแม่นยำ วัสดุที่ตรวจจับได้: กระดาษน้ำหนัก 100–2,000 g/m², แผ่นและฟิล์มพลาสติกหนาไม่เกิน 5 mm*, ฟิล์มกาวในตัว, แผ่นโลหะหนาไม่เกิน 2 mm*, กระดาษลูกฟูก, Wafer และ PCB (*ขึ้นอยู่กับวัสดุ) เอาต์พุต PNP 2 ช่อง: Double sheet และ Missing sheet ระยะห่างตัวส่ง-ตัวรับ 30 - 70 mm; optimal: 50 mm ± 3 mm ไฟเลี้ยง 20–30 V DC สาย PUR 2 m ระดับการป้องกัน IP65 อุณหภูมิใช้งาน +5 ถึง +60 °C

ข้อมูลทางเทคนิค (Technical Specifications)

General | TypeUltrasonic double sheet sensor
General | Designcylindrical M18
General | Seriesdbk+5
General | Operating modedouble sheet control
General | Particularitiesdistance between transmitter and receiver can be selected; cable connection
Electrical | Input 1control input
Electrical | Input 2control input
Electrical | Input 3control input
Electrical | Output 1double sheet output; pnp: Imax = 200 mA (UB-2V); NOC/NCC adjustable, short-circuit-proof
Electrical | Output 2missing sheet output; pnp: Imax = 200 mA (UB-2V); NOC/NCC adjustable, short-circuit-proof
Electrical | Control input< -UB+18 V: logic 1; > -UB+13 V or control input open: logic 0
Electrical | Response delay< 500 µs in trigger mode, 5.5 ms in free-run mode
Electrical | Voltage ripple± 10 %
Electrical | Switch-off delayuntil next edge in trigger mode, 5.5 ms in free-run mode
Electrical | Transmitter cableat the receiver: 1.2 m PUR cable, at the transmitter: 1 m PUR cable with M8 initiator plug
Electrical | Type of connection2 m PUR cable, 7 x 0.14 mm²
Electrical | Operating voltage UB20 - 30 V d.c., reverse polarity protection
Electrical | Delay prior to availability< 300 ms
Electrical | No-load current consumption≤ 50 mA
Mechanical | Weight160 g
Mechanical | Housing materialbrass sleeve, nickel-plated, plastic parts, PBT, PA
Mechanical | Degree of protectionIP65
Mechanical | Ultrasonic transducerpolyurethane foam, epoxy resin with glass contents
Mechanical | Transmitter/receiver spacing30 - 70 mm; optimal: 50 mm ± 3 mm
Mechanical | Permissible angular deviation± 45° from the perpendicular to the sheet
Mechanical | Max. tightening torque of nuts15 Nm
Operation | Controlscontrol input
Operation | SettingsTeach-in; LCA-2 with LinkCopy or LinkControl software
Operation | Indicators1 x Duo-LED; green: working / red: double sheet / flashing red: missing sheet
Environment | Storage temperature-40°C to +85°C
Environment | Operating temperature+5°C to +60°C
Ultrasonic | Blind zone7 mm in front of transmitter and receiver
Ultrasonic | Working rangepapers with weights of 100 - 2,000 g/m², plastic sheets and films up to 5 mm thick*, self-adhesive films, sheet metals up to 2 mm thick*, corrugated card, wafers, PCBs (*: material-dependent)
Ultrasonic | Means of measurementpulse operation with amplitude evaluation
Ultrasonic | Transducer frequency200 kHz

InfiSense Technologies Co., Ltd.

พิมพ์เมื่อ: 20 พฤศจิกายน 2569

ข้อมูลอาจมีการเปลี่ยนแปลง กรุณาตรวจสอบกับเจ้าหน้าที่

LINE