ข้ามไปเนื้อหา
2569000000

ภาพประกอบ สินค้าจริงอาจแตกต่าง

Weidmüller

เพาเวอร์ซัพพลายSwitch-mode Power Supply PRO TOP1 120W 12V 10A F, 12 V DC ± 1 % (2569000000)

รุ่น2569000000
Output power
120 W
Type
PRO TOP1 120W 12V 10A F
Series
PROtop
MTBF
According to Standard: SN 29500 Operating time (hours), min.: 1,500,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 795,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
90%
ดูข้อมูลจำเพาะทั้งหมด ↓
LINE

General

Type
PRO TOP1 120W 12V 10A F
Series
PROtop

General data

MTBF
According to Standard: SN 29500 Operating time (hours), min.: 1,500,000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 795,000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 120 W Duty cycle: 100 %
Protection degree
IP20
Degree of efficiency
90%
Short-circuit protection
Yes internal
Mounting position, installation notice
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies.

Electrical safety (applied standards)

Safety extra-low voltage
SELV acc. to IEC 60950-1 PELV according to EN 60204-1 SELV according to EN 62368-1

Output

Output power
120 W
Connection system
PUSH IN with actuator
Output voltage, max.
15 V
Output voltage, min.
11 V
Output voltage, note
adjustable with potentiometer or comunication module
Rated output voltage
12 V DC ± 1 %
Parallel connection option
Yes, for redundancy and power increase (with ORing MOSFET)
Residual ripple, breaking spikes
< 50 mVss @ UNenn, Full Load

Connection data (input)

Connection system
PUSH IN with actuator
Number of terminals
3 for L/N/PE
Conductor cross-section, rigid , max.
1.5 mm²
Conductor cross-section, rigid , min.
0.5 mm²
Conductor cross-section, flexible , min.
0.5 mm²
Conductor cross-section input (AWG), max.
12 AWG
Conductor cross-section (AWG) (input), min.
20 AWG

Connection data (output)

Connection system
PUSH IN with actuator
Conductor cross-section, rigid , max.
2.5 mm²
Conductor cross-section, rigid , min.
0.2 mm²
Conductor cross-section, flexible , max.
2.5 mm²
Conductor cross-section (AWG) (output), max.
12 AWG
Conductor cross-section (AWG) (output) , min.
26 AWG

Dimensions and weights

Depth
125 mm
Width
35 mm
Height
130 mm
Net weight
850 g

EMC / shock / vibration

Shock resistance IEC 60068-2-27
30 g in all directions
Interference immunity test acc. to
EN 55032:2015 EN 55035:2017 EN 61000-3-2:2014 EN 61000-6-1:2007 EN 61000-6-2:2005 EN 61000-6-3:2007/A1:2011 EN 61000-6-4:2007/A1:2011
Vibration resistance IEC 60068-2-6
2.3 g (on DIN rail) 4 g (with direct mounting)
Noise emission in accordance with EN55032
Class B

Input

Inrush current
max. 5 A
Connection system
PUSH IN with actuator
Frequency range AC
45…65 Hz
Rated input voltage
110...240 V AC / 120...340 V DC
AC input voltage range
85…277 V AC
Recommended back-up fuse
5 A, DI / 6 A, Char. B / 6 A, Char C
Power consumption, nominal
133.3 VA
Current consumption in relation to the input voltage
Voltage type: AC Input voltage: 100 V Input current: 2 A Voltage type: DC Input voltage: 120 V Input current: 2 A

Insulation coordination

Insulation voltage (input / earth)
3.2 kV
Insulation voltage (input / output)
3.5 kV
Insulation voltage (output / earth)
0.5 kV

Temperatures

Storage temperature
-40 °C...85 °C
Operating temperature
-25 °C...70 °C

วิธีสั่งซื้อ

  1. 1ส่งคำขอใบเสนอราคาระบุรหัสสินค้าและจำนวนที่ต้องการ
  2. 2รับใบเสนอราคาทีมงานตรวจสอบและส่งใบเสนอราคาให้
  3. 3จัดส่ง / ติดตั้งยืนยันคำสั่งซื้อแล้วจัดส่ง หรือติดตั้งหน้างาน

หาสินค้าไม่เจอ? ส่งรหัสสินค้าให้เราจัดหา

LINE