Illustration — the actual product may differ
Level SensorsHydrostatic Level Sensor Hydrocont (Ex)S50 (Hydrocont Ex S50)
Product codeHydrocont Ex S50
- Measuring principle
- Hydrostatic Level Sensor
- Product type
- Hydrostatic Level Sensor
- Manufacturer categories
- Fill level, Hydrostatic, Liquids
General
- Product type
- Hydrostatic Level Sensor
- Manufacturer categories
- Fill level, Hydrostatic, Liquids
ACS Hydrostatic Level Sensor · Hygene applications · Precise ceramic cell · Bright LED ensures exclent reading
- ACS-Control-System Hydrostatic Level Sensor: Hydrocont (Ex)S50.
- Hygene applications
- Precise ceramic cell
- Bright LED ensures exclent reading
- The devices of the series Hydrocont® S50 with integrated digital evaluation electronic are compact sensors for measuring and monitoring of fill levels.
- The excellent characteristics like highest strength against pressure and pressure blows, high resistance against chemicals and corrosion, very good insensitiveness against temperature shocks and EM interference, highest accuracy and long term stability and also low influence of temperature makes it possible to use the sensor in all pressureless containers for liquid medium like water, waste water, solvents, oil, sludge, grease, cleaning agents, etc.
- The level measurement system Hydrocont® S50 is built in the wall of the medium container. The medium contacts directly the ceramic membrane of the sensor without using a pressure mediator liquid and causes there a deflection of the membrane because of the hydrostatic pressure of the medium.
- At the maximum deflection the membrane contacts a robust ceramic carrier and because of this, the membrane come through over pressure of e.g. 80-times of nominal load at a sensor with a pressure range of 0…50 mbar without damage. The fill level proportional pressure signal of the ceramic membrane is recorded from a processor with high resolution, adjusted according to the settings and converted into a high resolution output signal of 4…20mA or 0…10V. By using 3 keys and an LED display the sensor measurement range, the display, the PNP-switching outputs and the damping can be adjusted or the behaviour in the case of failure and the release of the fast adjustment can be set.
- Function
- The level measurement system Hydrocont® S50 is built in the wall of the medium container.
- The medium contacts directly the ceramic membrane of the sensor without using a pressure mediator liquid and causes there a deflection of the membrane because of the hydrostatic pressure of the medium.
- At the maximum deflection the membrane contacts a robust ceramic carrier and because of this, the membrane come through over pressure of e.g. 80-times of nominal load at a sensor with a pressure range of 0…50 mbar without damage.
- The fill level proportional pressure signal of the ceramic membrane is recorded from a processor with high resolution, adjusted according to the settings and converted into a high resolution output signal of 4…20mA or 0…10V.
- By using 3 keys and an LED display the sensor measurement range, the display, the PNP-switching outputs and the damping can be adjusted or the behaviour in the case of failure and the release of the fast adjustment can be set.
- The switching state of the two PNP-switching output is signalled by one LED for every output.
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site