ภาพประกอบ สินค้าจริงอาจแตกต่าง
เพาเวอร์ซัพพลายSwitch-mode Power Supply PRO TOP3 120W 24V 5A CO, 24 V DC ± 1 % (2467070000)
รุ่น2467070000
- Output power
- 120 W
- Type
- PRO TOP3 120W 24V 5A CO
- Series
- PROtop
- MTBF
- According to Standard: SN 29500 Operating time (hours), min.: 2,000,000 h Ambient temperature: 25 °C Input voltage: 400 V Output power: 120 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 934,000 h Ambient temperature: 40 °C Input voltage: 400 V Output power: 120 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 89%
General
- Type
- PRO TOP3 120W 24V 5A CO
- Series
- PROtop
General data
- MTBF
- According to Standard: SN 29500 Operating time (hours), min.: 2,000,000 h Ambient temperature: 25 °C Input voltage: 400 V Output power: 120 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 934,000 h Ambient temperature: 40 °C Input voltage: 400 V Output power: 120 W Duty cycle: 100 %
- Protection degree
- IP20
- Degree of efficiency
- 89%
- Short-circuit protection
- Yes internal
- Mounting position, installation notice
- Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies.
Electrical safety (applied standards)
- Safety extra-low voltage
- SELV acc. to IEC 60950-1 PELV according to EN 60204-1
Output
- Output power
- 120 W
- Connection system
- PUSH IN with actuator
- Output voltage, max.
- 28.8 V
- Output voltage, min.
- 22.5 V
- Output voltage, note
- adjustable with potentiometer or comunication module
- Rated output voltage
- 24 V DC ± 1 %
- Parallel connection option
- Yes, for redundancy and power increase (with ORing MOSFET)
- Residual ripple, breaking spikes
- < 50 mVss @ UNenn, Full Load
Connection data (input)
- Connection system
- PUSH IN with actuator
- Number of terminals
- 4 for L1/L2/L3/PE
- Conductor cross-section, rigid , max.
- 1.5 mm²
- Conductor cross-section, rigid , min.
- 0.5 mm²
- Conductor cross-section, flexible , min.
- 0.5 mm²
- Conductor cross-section input (AWG), max.
- 12 AWG
- Conductor cross-section (AWG) (input), min.
- 20 AWG
Connection data (output)
- Connection system
- PUSH IN with actuator
- Conductor cross-section, rigid , max.
- 2.5 mm²
- Conductor cross-section, rigid , min.
- 0.2 mm²
- Conductor cross-section, flexible , max.
- 2.5 mm²
- Conductor cross-section (AWG) (output), max.
- 12 AWG
- Conductor cross-section (AWG) (output) , min.
- 26 AWG
Dimensions and weights
- Depth
- 125 mm
- Width
- 39 mm
- Height
- 130 mm
- Net weight
- 967 g
EMC / shock / vibration
- Shock resistance IEC 60068-2-27
- 30 g in all directions
- Interference immunity test acc. to
- EN 55032 (EN 55022) EN 61000-6-1, 2, 3, 4
- Vibration resistance IEC 60068-2-6
- 2.3 g (on DIN rail) 4 g (with direct mounting)
Input
- Inrush current
- Max. 10 A
- Connection system
- PUSH IN with actuator
- Frequency range AC
- 45…65 Hz
- Rated input voltage
- 3x 400...3x 500 V AC (wide-range input)
- AC input voltage range
- 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
- Recommended back-up fuse
- 1 - 2 A, Char. C
- Power consumption, nominal
- 134.8 VA
- Current consumption in relation to the input voltage
- Voltage type: 3-phase AC Input voltage: 320 V Input current: 1 A Voltage type: DC Input voltage: 400 V Input current: 0.4 A
Insulation coordination
- Insulation voltage (input / earth)
- 3.2 kV
- Insulation voltage (input / output)
- 3.5 kV
- Insulation voltage (output / earth)
- 0.5 kV
Temperatures
- Storage temperature
- -40 °C...85 °C
- Operating temperature
- -40 °C...70 °C
Weidmüller PROtop · PRO TOP3 120W 24V 5A CO · 120 W · 24 V DC ± 1 % · 5 A @ 60 °C · input 3x 400...3x 500 V AC (wide-range input) · PUSH IN with actuator · IP20
- เพาเวอร์ซัพพลายแบบสวิตชิ่ง (Switch-mode Power Supply) Weidmüller ซีรีส์ PROtop รุ่น PRO TOP3 120W 24V 5A CO (Order No. 2467070000)
- PROtop เป็นเพาเวอร์ซัพพลายที่ผสานสมรรถนะสูงเข้ากับความยั่งยืน ประสิทธิภาพสูงช่วยลดค่าพลังงานได้อย่างต่อเนื่อง อายุการใช้งานยาวและค่า MTBF สูงช่วยเพิ่มความพร้อมใช้งานของระบบ และมีขนาดกะทัดรัดประหยัดพื้นที่ในตู้ควบคุม ตามข้อมูลผู้ผลิต อายุการใช้งานยาวเป็นสองเท่าของเพาเวอร์ซัพพลายทั่วไป
- ข้อมูลหลัก:
- กำลังเอาต์พุต: 120 W
- แรงดันเอาต์พุต: 24 V DC ± 1 %
- กระแสเอาต์พุตพิกัด: 5 A @ 60 °C
- แรงดันอินพุตพิกัด: 3x 400...3x 500 V AC (wide-range input)
- ช่วงแรงดันอินพุต AC: 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
- ช่วงแรงดันอินพุต DC: 450...800 V DC
- ประสิทธิภาพ (Efficiency): 89%
- การต่อสาย: ขั้วต่อแบบ PUSH IN with actuator
- อุณหภูมิใช้งาน: -40 °C...70 °C
- ระดับการป้องกัน: IP20
- ขนาด (W x H x D): 39 mm x 130 mm x 125 mm
- ต่อขนาน (Parallel connection) ได้: Yes, for redundancy and power increase (with ORing MOSFET)
- มีหน้าสัมผัสแจ้งสถานะ (Floating contact)
วิธีสั่งซื้อ
- 1ส่งคำขอใบเสนอราคาระบุรหัสสินค้าและจำนวนที่ต้องการ
- 2รับใบเสนอราคาทีมงานตรวจสอบและส่งใบเสนอราคาให้
- 3จัดส่ง / ติดตั้งยืนยันคำสั่งซื้อแล้วจัดส่ง หรือติดตั้งหน้างาน